Hydraulische koppelingen - grondstoffen
Classificatie van koolstofstaal
(1) Afhankelijk van het gebruik kan koolstofstaal worden onderverdeeld in koolstofconstructiestaal, koolstofgereedschapsstaal en vrijsnijdend constructiestaal. Koolstofconstructiestaal wordt onderverdeeld in constructiestaal voor de techniek en constructiestaal voor de machinebouw. Er zijn twee soorten:
(2) Afhankelijk van de smeltmethode kan het worden onderverdeeld in openhaardstaal en converterstaal;
(3) Volgens de deoxidatiemethode kan het worden onderverdeeld in kokend staal (F), gedood staal (Z), half gedood staal (B) en speciaal gedood staal (TZ);
(4) kan op basis van het koolstofgehalte worden onderverdeeld in staal met een laag koolstofgehalte (WC 0.25% of minder), koolstofstaal, staal met een gemiddeld koolstofgehalte (WC 0.25% 0.6%) en staal met een hoog koolstofgehalte (WC > 0.6%);
(5)according to the quality of steel, carbon steel can be divided into ordinary carbon steel (containing phosphorus, sulfur is higher), high quality carbon steel (containing phosphorus, sulfur is lower) and high quality steel (containing phosphorus, sulfur is lower) and super high quality steel.
Soorten koolstofstaal
Structureel koolstofstaal
Grade: Example Q235-A·F, σ S =235MPa.
Note :Q is yield strength A quality grade (ABCD 4), F boiling steel.
Kenmerken: lage prijs, uitstekende procesprestaties (zoals lasbaarheid en koude vervormbaarheid).
Applications: General engineering structures and general machinery parts. Such as Q235 can make bolts, nuts, pins, hooks and less important mechanical parts and building structures in the rebar, steel, steel bar, etc..
Hoogwaardig koolstof constructiestaal
Grade: Example 45, 65Mn, 08F.
Brand note: direct expression of metal carbon content of ten thousand fractions.
Application: Non-alloy steels used in the manufacture of important mechanical parts, usually after heat treatment.
Common steel numbers and uses:
08F, low carbon mass fraction, good plasticity, low strength, used for stamping parts such as automobile and instrument shell;
20, good plasticity and weldability, used for strength requirements are not high parts and carburizing parts, such as machine cover, welding container, small shaft, nut, washer and carburizing gear;
45,40 Mn, good comprehensive mechanical properties after quenching and tempering, used for mechanical parts with large force, such as gears, connecting rods, machine tool spindles, etc.
60, 65Mn steel has high strength; Used for manufacturing various springs, locomotive rim, low speed wheels.
Koolstof gereedschapsstaal
Grade: for example, T12 steel represents a carbon tool steel with Wc=1.2%.
Note :T plus metal carbon content of the thousand fraction.
Features: Eutectoid steel and eutectoid steel, high strength, hardness, good wear resistance, suitable for manufacturing various low speed cutting tools.
Common steel numbers and uses:
T7, T8: make parts that require toughness to withstand a certain impact. Such as sledgehammers, punches, chisels, carpentry tools, scissors.
T9, T10, T11: tools with low impact and high hardness and wear resistance. Such as tap, small drill, die, hand saw blade.
T12, T13: Make impact-proof tools. Such as file, scraper, razor, measuring tool.
Gegoten staal
Grade: for example, zg200-400, which indicates the cast steel whose σs is 200MPa and σb is 400 mpa.
Properties: casting properties are worse than cast iron, but mechanical properties are better than cast iron.
Application: it is mainly used to manufacture important mechanical parts with complex shape, high mechanical property requirement, and difficult to be formed by forging and